BaodingLift and traverse puzzled parking equipment-chain lifting
Category:
BaodingLift and traverse parking equipment
Key words:
Product Description
Applicable occasions
Generally applicable to the basement or ground parking lot, the clear height of the basement is greater than 3.62m to meet the conditions of use.
Equipment features
The lifting method is chain lifting, which can be designed as two or three layers.
Vehicles enter and exit from the ground floor, the parking spaces on the ground floor only move horizontally, and the parking spaces on the top floor only move up and down to complete the access and retrieval of vehicles.
Generally, 3 train seats on the ground are designed as a group, referred to as 3 2 structure for short; That is, 2 parking spaces are added to the original 3 parking spaces. If the site size allows, several groups can be designed as a control area. Each group of control area needs to leave a horizontal space at the lower layer, and the number of cars in each group of control area is generally not more than 20. A control system is designed for each control area.
The design structure is a four-column frame structure, which runs smoothly and reliably. It only needs 20cm concrete floor and is fixed by chemical anchor bolts without special treatment.
Design multiple safety protection devices to ensure the safety of people, vehicles and equipment.
Equipment parameters
| suitable parking species | Model | Large vehicle (D) | Large car (T) |
| Vehicle size (mm) | Length x width x height | Length x width x height | |
| 5000*1850*1550 | 5300*1900*1550 | ||
| Vehicle weight | ≤ 2350kg | ≤ 2350kg | |
| Demand space | Total length of equipment (mm) | 5870 | 6170 |
| Full width of equipment (mm) | 7660 | 7660 | |
| Full height of equipment (mm) | 3620 | 3620 | |
| Technical parameters | Capacity car quantity | N*2-1 | |
| Driving mode | Chain type | ||
| Motor | Lift motor = 2.2kw, traverse motor = 0.2kw | Lift motor = 3.7kw, traverse motor = 0.2kw | |
| Speed | Lifting 4-5 m/min | 6-8 m/min traverse | |
| Operation mode | IC card operation digital button type | ||
| Control System | PLC system | ||
| Power Requirements | Three-phase five-wire 380V | ||
Equipment Schematic Diagram
